Casio EXILIM EX-Z1200 User Manual
Page 98
98
SHOOTING A SNAPSHOT
5.
Half-press the shutter button.
This will focus on the face with the highest priority (the one
with the green frame) and adjust its brightness. When
focusing is complete, a green focus frame will appears at
the faces that were indicated by green frames in step 4
above.
6.
When you are ready to shoot, press the
shutter button the rest of the way.
NOTE
• Be sure to select “
(Tracking)” for the AF area
whenever “Family First” is selected as the face recognition
mode (page 131).
Selecting the Face Detection Method (Priority)
Use the following procedure to specify whether you want to give
priority to faster speed or a higher number of faces during face
detection.
1.
Enter a REC mode.
2.
Press [
S] (
) once.
3.
Use [
W] and [X] to select “
Priority” and
then press [SET].
4.
Use [
S] and [T] to select the setting you want,
and then press [SET].
NOTE
• Selecting “Quantity” while using the Normal mode will
make it possible to detected smaller faces at a greater
distance than when “Speed” is selected.
To do this:
Select this
setting:
Minimize face detection time. Up to five
faces can be detected.
Speed
Allow detection of a maximum of five to
ten faces.
Quantity