Casio EXILIM EX-Z1200 - Manual (Page 97)

97
SHOOTING A SNAPSHOT
Deleting recorded face data
Perform the following steps when you want to delete recorded
face data.
1. Enter a REC mode.
2. Press [ S] ( ) once.
3. Use [ W] and [X] to select “ Edit Family”
and then press [SET].
4. Press [MENU].
5. Use the procedures under “Deleting a Specific
File” (page 205) and “Deleting All Files” (page
206) to delete the face data you want.
• You can exit this procedure by pressing [MENU].
NOTE
• Formatting the camera’s built-in memory (page 218)
deletes all the recorded face data.
■
Shooting a Snapshot using Recorded and
Edited Face Data
After you record and edit face data, you can use it to shoot
photographs. The camera will record images in accordance with
the priority levels you configured for each set of face data.
1. Enter a REC mode.
2. Press [
S] (
) once.
3. Use [ W] and [X] to select “ Face
Recognition: Family First” and then press
[SET].
4. Point the camera at the
subjects.
The camera will detect the
faces of the people whose
face data has been saved in
camera memory. The
detected faces all will be
bounded by frames after detection is complete.
• The frames will be colored according to the priority level
of the face: White (lowest), yellow, or green (highest). A
green frame indicates the highest priority face when the
image is recorded.