Casio EXILIM EX-Z1200 - Manual (Page 71)

71
SHOOTING A SNAPSHOT
1. In a REC mode, press [MENU].
2. On the “REC” tab, select “AF Assist Light”
and then press [
X].
3. Use [
S] and [T] to select “Off” and then press
[SET].
When you want to turn on the AF assist lamp, select “On”
here.
IMPORTANT!
• Do not look directly into the AF assist/REC light/self-timer
lamp or point it directly at a person’s eyes.
Snapshot Shooting Precautions
■
Operation
• While the operation lamp is flashing green, never open the
battery cover or place the camera onto or remove it from the
USB cradle. Doing so can result in incorrect storage of the
image you just shot, damage to other images stored in
memory, malfunction of the camera, etc.
• If unneeded light is shining directly onto the lens, shade the
lens with your hand when shooting an image.
■
Monitor Screen when Shooting Snapshots
• The image that appears on the monitor screen is for image
composition. The actual image will be recorded at the quality
set for the image quality setting.
• Subject brightness conditions can cause monitor screen
response to slow and can cause digital noise in the monitor
screen image.