Dell Dimension 1100/B110 User Manual

Page 25

2. Locate the 3-pin password jumper (PSWD) on the

and attach the jumper plug to pins 2 and 3 to clear

the password.

NOTE:

When you receive your computer, the jumper plug is attached to pins 1 and 2.

3. Close the computer cover.

4. Connect your computer and monitor to electrical outlets, and turn them on.

5. After the Microsoft Windows desktop appears on your computer,

6. Turn off the monitor and disconnect it from the electrical outlet.

7. Disconnect the computer power cable from the electrical outlet, and press the power button to ground the system

board.

8. Open the computer cover.

9. Locate the 3-pin password jumper on the

and attach the jumper to pins 1 and 2 to re- enable the

password feature.

10.

NOTICE:

To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

Connect your computer and devices to electrical outlets, and turn them on.