Dell PowerVault NX1950 - Manual (Page 10)

8
Upgrading Your Operating System
10 When prompted, log in to your system as Administrator.
After you login, the Windows Server Post-Setup Security Updates
window may appear. Click Finish.
11 The Dell PowerVault NX1950 Storage Initialization Wizard window
appears. Close this window.
The following message may also appear. If the message does not appear,
proceed to step 12.
MMC cannot open the file
C:\windows\system32\nas.msc. This may also be
because you do not have sufficient access rights
to the file.
This error occurs because the operating system upgrade procedure is
not complete. This error will be fixed after you complete the upgrade
procedures.
Click OK to continue.
12 Browse to D:\cmpnents\R2 and run the setup2.exe file,
where D:\ is the DVD drive.
NOTE:
In the Explorer window, do not double-click the DVD icon.
This may restart the upgrade process.
The following message appears:
Windows Server 2003 R2 is installed on your
system. To continue and reinstall Windows Server
R2 files, click Yes. To exit Setup, click No.
13 Click Yes to continue.
The Windows Server 2003 R2 Setup Wizard window appears.
14 Click Next.
15 In the Setup Summary window, review the setup parameters and
then click Next.
The installation procedure continues, and the Windows Storage
Server 2003 x64 R2-specific files are copied to your system.
NOTE:
This procedure may take several minutes to complete.