beautypg.com

Cadillac 2009 Escalade EXT User Manual

Page 222

background image

PARK TILT MIRRORS

This feature allows you to select whether or not the
outside mirror(s) will automatically tilt down when
the vehicle is shifted into R (Reverse). See Outside
Power Foldaway Mirrors
on page 2-47 for more
information.

Press the customization button until PARK TILT
MIRRORS appears on the DIC display. Press the
set/reset button once to access the settings for
this feature. Then press the customization button to
scroll through the following settings:

OFF (default): Neither outside mirror will be tilted down
when the vehicle is shifted into R (Reverse).

DRIVER MIRROR: The driver’s outside mirror will be
tilted down when the vehicle is shifted into R (Reverse).

PASSENGER MIRROR: The passenger’s outside
mirror will be tilted down when the vehicle is shifted into
R (Reverse).

BOTH MIRRORS: The driver’s and passenger’s outside
mirrors will be tilted down when the vehicle is shifted
into R (Reverse).

NO CHANGE: No change will be made to this feature.
The current setting will remain.

To select a setting, press the set/reset button while the
desired setting is displayed on the DIC.

EASY EXIT RECALL

If your vehicle has this feature, it allows you to select
your preference for the automatic easy exit seat feature.
See Memory Features on page 1-7 for more information.

Press the customization button until EASY EXIT
RECALL appears on the DIC display. Press the set/reset
button once to access the settings for this feature.
Then press the customization button to scroll through
the following settings:

DOOR BUTTON ONLY: No automatic seat exit recall
will occur. The recall will only occur after pressing
the easy exit seat button.

BUTTON AND KEY OUT (default): If the features are
enabled through the EASY EXIT SETUP menu, the
driver’s seat will move back, and the power steering
column will move up when the key is removed from the
ignition or after pressing the easy exit seat button.

The automatic easy exit seat movement will only occur
one time after the key is removed from the ignition.
If the automatic movement has already occurred, and
you put the key back in the ignition and remove it again,
the seat and steering column will stay in the original
exit position, unless a memory recall took place prior to
removing the key again.

3-62