beautypg.com

Intellibeam, Intelligent high-beam headlamp control system – Cadillac 2009 Escalade EXT User Manual

Page 174

background image

2

(Headlamps): Turns on the headlamps together

with the following lamps listed below.

Parking Lamps

Instrument Panel Lights

Taillamps

License Plate Lamps

When the headlamps are turned on while the vehicle
is on, the headlamps will turn off automatically
10 minutes after the ignition is turned off. When the
headlamps are turned on while the vehicle is off,
the headlamps will stay on for 10 minutes before
automatically turning off to prevent the battery from
being drained. Turn the headlamp control to off and
then back to the headlamp on position to make
the headlamps stay on for an additional 10 minutes.

IntelliBeam

®

Intelligent High-Beam

Headlamp Control System

For vehicles with this feature, be sure to read this entire
section before using it.

IntelliBeam

®

is an enhancement to the vehicle’s

headlamp system. Using a digital light sensor on the
rearview mirror, this system will turn the vehicle’s
high-beam headlamps on and off according to
surrounding traffic conditions.

The IntelliBeam

®

system turns the high-beam

headlamps on when it is dark enough, there is no other
traffic present, and the IntelliBeam

®

system is enabled.

Turning On and Enabling IntelliBeam

®

Press and release the IntelliBeam

®

button on the inside

rear view mirror. The IntelliBeam

®

indicator on the

mirror will turn on to let you know the system has been
turned on. Once the system has been turned on, it
will remain on each time the vehicle is started.
Additionally, the IntelliBeam

®

system must be enabled.

To enable the IntelliBeam

®

system, turn the exterior lamp

control to AUTO, with the turn signal/multifunction lever in
its neutral position. The High-Beam On Light will appear
on the instrument panel cluster when the high-beams are
on. See Highbeam On Light on page 3-40.

Driving with IntelliBeam

®

IntelliBeam

®

will only activate your high-beams when

driving over 20 mph (32 km/h).

The high-beam headlamps will remain on, under the
automatic control of IntelliBeam

®

, until any of the

following situations occur:

The system detects an approaching vehicle’s
headlamps.

The system detects a preceding vehicle’s taillamps.

The outside light is bright enough that high-beam
headlamps are not required.

3-14