Baumer BA DenexEdgeDetectorII - Manual (Page 12)

User Manual DENEX Edge Detector II 12/20 Baumer Electric AG
Version 2013-02, V1.6 www.baumer.com Frauenfeld, Switzerland
7 ACCESSORIES
There are a number of accessories available from Baumer that can save you time and
ensure a good operation of the sensor. Kits for replacing mechanical or older sensors are
available. See web site
www.baumer.com or www.denex.com for more updated
information.
8 LASER SAFETY
A Class II-laser product as the DENEX Edge Detector II is said to be safe if a person does
not stare into the beam. If a person accidentally would look into the laser, the strong light
would cause the eyes to shut automatically before any damage to the eyes could occur. If
the following precautions are followed, nothing can happen.
CAUTION
•
Do not stare into the laser beam or a reflection of the beam from a mirror-like
surface!
•
Do not move or adjust the DENEX Edge Detector II, without first turning off the
power! The green LED must be off!
•
Service on the sensor should be made by qualified personnel only!
•
The sensor must be installed in such way, that the laser does not hit a glossy,
mirror-like surface!
Visible Warning-LED
The green LED is the POWER-LED, which indicates that the laser is on!
Never move or adjust the sensor when the green LED is on!