Baumer BA DenexEdgeDetectorII - Manual (Page 11)

User Manual DENEX Edge Detector II 11/20 Baumer Electric AG
Version 2013-02, V1.6 www.baumer.com Frauenfeld, Switzerland
6 TECHNICAL SPECIFICATIONS
Maximum
Count Rate < 600.000 copies/hour
Maximum
Product Speed 1 m/s (200 ft/min) for thinnest product, up
to 2 m/s otherwise
Maximum
Stream Thickness 70 mm (2.76”) standard range
Minimum
Product Thickness 0,25 mm (0.01”) standard range
Distance
From Conveyor 100 mm (3.94”) standard range
Minimum Spacing
Between Copies 1-5 mm (0.039-0.20”) dep. on thickness,
speed and pulse width
Stream
Conditions Folded edge first. Cut edge first possible,
but not recommended.
Operating
System RISC microprocessor
Pulse
Width 5 ms (preset) and 20ms
Output
Signal Opto-isolated transistor
5 to 30V max. 150 mA
Matching Female
Connector Amphenol-Tuchel C91A
T 3476 001
Laser System Visible, switched laser diode,
650 nm, with laser safety monitor
Laser Safety
Class Class II
Estimated Lifetime
of Laser > 50,000 h @ 20ºC
Weight 800 g, 1.75 lbs.
Size 175 x 96 x 31mm
6.89 x 3.78 x 1.22”
Power 24 VDC,
150 mA typical
Temp. Range +10 to 40ºC
50 to 104ºF
DENEX Edge Detector II is a Class II Laser Product.