Baumer PA201 - Manual (Page 17)

PA201
www.baumer.com 17
4.1 Input configuration
Select input signal
Pt100
Thermocouple J
Thermocouple K
Thermocouple T
4.2 Display configuration
Resolution (*)
Resolution in degree 1/10
Resolution in degree
(*) Thermocouple resolution does not enable programming.
Indication is ever in degrees.
Display unit
Degrees Celsius
Degrees Fahrenheit
4.3 Programming lock
Accessing programming line „Programming lock“ is after completion
of display configuration by proceeding as follows:
Select display unit (°C or °F) and hold for 5 seconds.
Enter 0 or 1 in “LC”.
Programming lock disabled
Programming lock enabled
Programming lock means programming lines are read only which will
be signaled by [dAtA] instead of [Pro] appearing in the display when
accessing programming level.