Baumer PA201 - Manual (Page 16)

PA201
16 www.baumer.com
4 Operating mode – programming mode
Operating mode
The device is automatically in operating mode after power on,
indicating the actual value.
Programing mode
Device parameterization is by three soft keys located below the front
panel (see below).
Keypad
(view from below)
Key functions
Key
Access programming level and select programming line.
Key
Select functionality or decade in the programming line.
Key
Without function.
How to program
1. Press , display will switch to [Pro] which means access to pro-
gramming level. Another press will make the display skip to first
programming line (option input signal).
2. Proceed with line parameterization using keys and .
3. Pressing will save the parameters after having them indicated
for short. The device will automatically exit the programming level.
4. Programming access can be disabled at programming level, in this
case programming lines will be read only. The device will signal
any programming lock by [dAtA] instead of [Pro] upon access.