Cabletron Systems W85 - Manual (Page 38)

Chapter 4: Management
4-8 HSIM-W85 User’s Guide
Options: imux (with no options) displays status
information.
-ea enables the Inverse Multiplexer Application
designated by IMUXID.
-da disables the Inverse Multiplexer Application
designated by IMUXID.
-eg enables the Inverse Multiplexer group
designated by GROUPID.
-dg disables the Inverse Multiplexer group
designated by GROUPID.
-ac adds the WAN
channel designated by INTERFACENUM to the Inverse
Multiplexer group designated by GROUPID.
-dc deletes the WAN
channel designated by INTERFACENUM from the
Inverse Multiplexer group designated by GROUPID.
Example:
imuxsetup1
-> imux 1 -ac 1 29
# Inverse Multiplexer channel with ifIndex 29 added to group 1
-> imux 1
#
# WAN Inverse Multiplexer 1 Status: Disabled
#
# Inverse WAN Available Xmit Byte Inverse
# Multiplexer Group Physical BW Count Multiplexer Channel
# ID Admin Status Number (bits/sec) (bytes) ID IfIndex Status
#-------------------------------------------------------------------------------------------------------------
# 1 Disabled 22 1536000 0 1 29 INACTIVE
#
#
# Number of WAN Inverse Multiplexer Groups currently programmed : 1
#
# Number of WAN Inverse Multiplexer Channels currently programmed : 1