Cabletron Systems W85 - Manual (Page 36)

Chapter 4: Management
4-6 HSIM-W85 User’s Guide
The commands are presented in the following format:
command
Syntax: Shows the required command format. It indicates where
arguments, if any, must be specified.
Description: Briefly describes the command and its uses.
Options: Lists any additional fields in the appropriate format that
may be added to the command.
Example: Shows an example of how to use the command.
NOTE
The conventions used in describing the commands in Network
Tools are as follows:
Arguments enclosed by [ ] require one of the strings to be
entered exactly as written.
Arguments enclosed by < > require that a value be entered in
place of the string.
In the following command examples, the information entered by
the user is shown in bold Helvetica font
.
To abort the output or interrupt a process, press the CONTROL
key and c key simultaneously, designated as ^C here.