Cabletron Systems W85 - Manual (Page 37)

Network Tools
HSIM-W85 User’s Guide 4-7
4.2.2 Built-in Commands
The built-in commands listed in this section activate configuration and
viewing functions on the HSIM-W85.
imux
Syntax: imux
imux -[ea | da]
imux -[eg | dg]
imux -[ac | dc]
Description: imux is used to combine multiple WAN channels into
logical inverse multiplexing (IMUX) groups. Once IMUX
is configured, data will be evenly distributed over all of
the logical channels configured.
- A unique value identifying an element in a
sequence of Inverse Multiplexer Applications which
belong to an IP host.
- A unique value identifying an element in
a sequence of groups which belong to a WAN Inverse
Multiplexer Application.
- The MIB II ifIndex value used to
represent a WAN channel that has an appropriate datalink
protocol associated with it.
NOTE
Cabletron Systems products that support Inverse Multiplexing
(IMUX), such as the HSIM-W85, HSIM-W87, HSIM-W6,
CSX400, and HSIM-W84, must exist on both ends of the WAN
link for the IMUX function to work. All bridging and switching
functions, such as 802.1D, SecureFast VLAN, and 802.1Q are
able to run as normal on the host platform when using the
IMUX function on the HSIM-W85.