Cabletron Systems W85 - Manual (Page 19)

Features
HSIM-W85 User’s Guide 1-7
1.5.5 DS1 Alarm
The DS1 Error Threshold Alarm Monitor allows the user to set error
thresholds. The monitor notifies the user of potential DS1 problems with
SNMP trap events.
The ds1alarm Monitor feature can be enabled in management, using
Network Tools. Refer to the ds1alarm command in the
Management
chapter.
1.5.6 SNMP and MIB Support
With SNMP support, the MIBs supported by the HSIM-W85 include:
• RFC 1406 – Definitions of Managed Objects for the DS1 and E1
Interface Types
• RFC 1213 (MIB II) support for the Interface Table
• Cabletron Enterprise MIBs
• RFC 2233 – Support for the Interface Stack Table
Refer to the Release Notes included with the host platform for a list of all
MIBs supported by the HSIM-W85. For information about how to extract
and compile individual MIBs, contact Cabletron Systems (
Section 1.8 ).
1.5.7 LANVIEW Diagnostic LEDs
Cabletron Systems provides a visual diagnostic and monitoring system
called LANVIEW. The HSIM-W85 LANVIEW LEDs help you quickly
identify status of the device.
Chapter 3 provides information on the
HSIM-W85 LEDs. The host platform LEDs may also indicate
information for the HSIM-W85. Refer to the appropriate host platform
manual for further information on the host platform LEDs.