beautypg.com

Maintenance and care – FORD 1999 Windstar User Manual

Page 230

background image

Vertical aim adjustment

The numbers shown on the vial indicate beam direction in degrees up or
down.

1. Park the vehicle on a level
surface

2. Locate the bubble level vertical
aim indicator located on the bottom
shelf of the headlamp reflector,
visible through the headlamp lens.

3. With the hood open, locate the
vertical adjusting screw on the outer
top of the headlamp.

4. Using an E8 Torx socket rotate
the adjusting screw until the bubble
in the vial is centered between the
two white lines (which represent
the “0” mark) when viewed from the
front of the lens.

5. When the horizontal and vertical
indicators are set to the “0” mark, the headlamp has been properly
aimed.

6. Close the hood.

CLEANING AND CARING FOR YOUR VEHICLE

Refer to the “Customer Assistance Guide” for a list of Ford-approved
cleaners, polishes and waxes.

D

U

Maintenance and care

230