FORD 1999 Windstar - Manual (Page 170)

The fuse holder is designed to allow you to pull the fuse (#6) from the
fuse panel circuit without having to completely remove it from the fuse
panel. The fuse and fuse holder will remain in the fuse panel.
If the fuse (#6) must be replaced, the fuse and fuse holder can be
removed by pulling it completely out from the fuse panel cover.
With the fuse (#6) removed, the following systems will not be functional:
• radio
• power sliding door(s) – (if equipped)
• keyless entry system– (if equipped)
When the pull fuse is reinstalled, the following features will need to be
reset.
• radio pre-sets
• power sliding door(s) – (if equipped)
Please refer to the Using Your Audio System and Power Sliding Door
sections in the Controls and Features chapter for instructions to reset
these features.
RELAY 1 RELAY 2 RELAY 3
RELAY 4 RELAY 5 RELAY 6
FUSE 1
FUSE 7
FUSE 12
FUSE 18
FUSE 24
FUSE 8
FUSE 13
FUSE 19
FUSE 25
FUSE 9
FUSE 14
FUSE 20
FUSE 26
FUSE 10
FUSE 15
FUSE 21
FUSE 27
FUSE 11
FUSE 16
FUSE 22
FUSE 28
FUSE 17
FUSE 23
FUSE 29
FUSE 2 FUSE 3 FUSE 4 FUSE 5
FUSE 6
Roadside emergencies
170