beautypg.com

Controls and features – FORD 1999 Windstar User Manual

Page 100

background image

Arming the system

When armed, this system will help protect your vehicle from
unauthorized entry. When unauthorized entry occurs, the system will
flash the turn signal lamps and side repeaters and honk the horn.

The system is ready to arm whenever the key is removed from the
ignition. Any of the following actions will prearm the alarm system:
• Press the remote entry lock control
• Press the interior power door lock control while the door is open
Twenty seconds after one of the above events occurs, any door/hood that
is closed is armed.

Any door/hood that still open is prearmed and waiting for the door/hood
to be closed.

Once that input is closed, the input will arm in 20 seconds and the
exterior lamps may flash.

Disarming the system

You can disarm the system by any of the following actions:
• Press the transmitter unlock control.
• Unlock the doors with a key.
• Turn a programmed SecuriLock key to RUN /START.

SECURILOCK

ி

PASSIVE ANTI-THEFT SYSTEM

Your vehicle is equipped with a coded-key anti-theft system. Only the
correct key will be able to start your vehicle. If your keys are lost or
stolen, you must take your vehicle to your dealership for key
reprogramming.

The SecuriLock

௢ passive anti-theft system provides an advanced level of

vehicle theft protection. Your vehicle’s engine can only be started with
the two special SecuriLock

௢ electronically coded keys provided with

your vehicle. Each time you start your vehicle, the SecuriLock

௢ key is

read by the SecuriLock

௢ passive anti-theft system. If the SecuriLock௢

key identification code matches the code stored in the SecuriLock

passive anti-theft system, the vehicle’s engine is allowed to start. If the
SecuriLock

௢ key identification code does not match the code stored in

the system or if a SecuriLock

௢ key is not detected (vehicle theft

situation), the vehicle’s engine will not operate.

Controls and features

100