beautypg.com

Seating and safety restraints – FORD 1999 Windstar User Manual

Page 114

background image

2. (For 2nd row bench seat only.) Using the clip attached to the end of
the shoulder belt(s), clip the end of the belt to the stationary portion of
the shoulder belt coming out of the trim panel. The end of the shoulder
belt must be clipped in order to keep it from striking anything during
vehicle operation.

If your bench seat is equipped with the forward fold down seatback,
position the seatback in the full down position to make removing the
seat easier.

3. From behind the seat, pull straight back on the release controls
located on each side of the seat, releasing the rear floor latches.

Seating and safety restraints

114