FORD 2010 Flex v.2 - Manual (Page 50)

Note: Each headrest monitor is labeled with an identifier (either A or B)
found in the upper right corner of the system.
7. (On/Off): Press to turn the system on/off. Power for headrest A is
separate from headrest B.
Note: This also disables dual play. When both headrest systems are
turned off, the system will return to single play mode.
8. Infrared receiver (IR): System sensor which reads the signals from
the remote control and also sends audio signals to the infrared wireless
headphones.
9. LCD screen: This seven inch liquid crystal display (LCD) screen can
be adjusted for easier viewing by children. Pull the top of the screen
panel toward the viewer at the IR receiver/transmitter cover for a better
viewing angle. The screen is hinged at the bottom and pivots to face
downward. Push the screen back in place until it latches to return it to a
stowed position.
Note: Ensure that you do not pull the LCD screen too far forward as it
can cause damage.
10. CD/DVD slot: Insert the disc, label side facing the rear passengers.
Remote control
Unless otherwise stated, all operations can be carried out with the
remote control. Always point the remote control directly at the player.
Ensure that there are no obstructions between the remote and player.
Press the MON A B control to select either Monitor A or Monitor B.
Note: Each headrest monitor is labeled with an identifier (either A or B)
found in the upper right corner of the system.
Note: Use the remote to adjust the volume levels for wired headphones
for headrest media sources only (DVD, USB port and auxiliary inputs).
To adjust the volume levels on the infrared wireless headphones
(provided with your system), first use the remote control
volume-controls to adjust volume settings to maximum, then use the
rotary control on the side of the headphones to adjust the volume to the
desired listening level.
Entertainment Systems
50
2010 Flex (471)
Owners Guide, 2nd Printing
USA (fus)