beautypg.com

Car finder, Sounding a panic alarm, Programming memory feature to transmitter – FORD 2010 Flex v.2 User Manual

Page 137: Locks and security

background image

Car finder

Press

twice within three seconds. The horn will chirp and the turn

lamps will flash. It is recommended that this method be used to locate
your vehicle, rather than using the panic alarm.

Sounding a panic alarm

Press

to activate the alarm. The horn will sound and the turn lamps

will flash for a maximum of three minutes. Press again or turn the
ignition to the on position to deactivate, or wait for the alarm to time out
in three minutes.

Note: The panic alarm will only operate when the ignition is in the off
position.

Memory feature (seat, mirrors and adjustable pedals)

The Integrated Keyhead Transmitter (IKT) allows you to recall the
memory seat/power mirrors/adjustable pedals feature.

Press

to automatically move the driver seat, power mirrors and

adjustable pedals to the desired memory position. The mirrors will move
to the programmed position and the seat will move to the easy entry
position. The seat will move to the final position when the key is in the
ignition (if easy entry feature is enabled).

Programming memory feature to Transmitter

To activate this feature:

1. Move the driver seat, power mirrors, and adjustable pedals to the
desired positions using the associated controls.

2. Press and hold control button 1
for five seconds. A tone will be
heard after two seconds confirming
memory position has been set.
Continue to hold until a second tone
is heard after five seconds.

3. Within three seconds press the

.

4. A tone will be heard when the transmitter programming is complete.

5. Press the

.

6. Repeat this procedure for memory 2 and another transmitter if
desired.

Locks and Security

137

2010 Flex (471)
Owners Guide, 2nd Printing
USA
(fus)

This manual is related to the following products: