Power door locks, Smart locks, Locks – FORD 2010 Flex v.2 User Manual
Page 129: Locks and security
Condition
Potential Causes
I accidentally
programmed all keys as
MyKeys™
• Vehicle has a remote start system that is
recognized as an admin key. Refer to the
Using MyKey™ with remote start systems
section to reset all MyKeys™ as admin keys.
MyKey™ Programmed
total includes one
additional key
• Unknown key has been programmed to the
vehicle as a MyKey™.
• Vehicle is equipped with a remote start
system. Refer to Using MyKey™ with
remote start systems section.
Admin Keys
Programmed total
includes one additional
key
• Unknown key has been programmed to the
vehicle as admin key.
• Vehicle is equipped with a remote start
system. Refer to Using MyKey™ with
remote start systems section.
MyKey™ miles do not
accumulate
• MyKey™ is not being used by the intended
user.
• MyKey™ system has been recently cleared.
POWER DOOR LOCKS
• Press the
control to unlock all
doors.
• Press the
control to lock all
doors.
Smart locks
This feature helps to prevent you from locking yourself out of the vehicle
if your key is still in the ignition.
When you open one of the front doors or the liftgate and you lock the
vehicle with the power door lock control (on the driver or passenger
door trim panel), all the doors will lock, then all doors will automatically
unlock reminding you that your key is still in the ignition.
The vehicle can still be locked, with the key in the ignition, by locking
the driver’s door with a key, using the lock control on the remote entry
transmitter portion of your Integrated Keyhead Transmitter, or locking
the vehicle with the keyless entry keypad.
Locks and Security
129
2010 Flex (471)
Owners Guide, 2nd Printing
USA (fus)