Canon EOS 450D - Manual (Page 26)

26
Load a fully charged Battery Pack LP-E5 into the camera.
1
Open the battery compartment
cover.
Slide the lever as shown by the arrow
and open the cover.
2
Insert the battery.
Insert the end with the battery
contacts.
Insert the battery until it locks in
place.
3
Close the cover.
Press the cover until it snaps shut.
Open the cover and remove the
battery.
Press the battery lock lever as shown
by the arrow and remove the battery.
To prevent shorting, be sure to attach
the protective cover to the battery.
Installing and Removing the Battery
Installing the Battery
Removing the Battery
Do not further push open the battery compartment cover when it is already
open. Doing so may damage its hinge.