Maintenance and specifications – FORD 2011 Flex v.2 User Manual

Page 370

3. With the parking brake engaged and your foot on the brake pedal,
start the engine and move the gearshift lever through all of the gear
ranges. Allow a minimum of 10 seconds for each gear to engage.

4. Latch the gearshift lever in P (Park) and leave the engine running.

5. Remove the dipstick, wiping it clean with a clean, dry lint free rag. If
necessary, refer to Identifying components in the engine compartment
in this chapter for the location of the dipstick. (For vehicles with the
EcoBoost™ engine, move the air filter assembly aside to access the
transmission dipstick).

WARNING: Use gloves when moving the air filter assembly;
components will be hot.

For vehicles equipped with the EcoBoost™ engine, do the
following:

A. Shut the engine off.

B. Clean the area around the clamp
that connects the air filter assembly
to the rubber hose (1).

Maintenance and Specifications

370

2011 Flex (471)
Owners Guide, 2nd Printing
USA (fus)

This manual is related to the following products:

2011 Flex