beautypg.com

Maintenance and specifications – FORD 2011 Flex v.2 User Manual

Page 353

background image

NEVER increase the coolant concentration above 60%.
A coolant concentration of 60% will provide improved freeze

point protection. Increased engine coolant concentrations
above 60% will decrease the overheat protection
characteristics of the engine coolant and may cause engine
damage.

If available, refer to the chart on the coolant container to

ensure the coolant concentration in your vehicle will provide
adequate freeze protection at the temperatures in which you
drive in the winter months.

If you drive in extremely hot climates:
It is still necessary to maintain the coolant concentration

above 40%.

NEVER decrease the coolant concentration below 40%.
Decreased engine coolant concentrations below 40% will

decrease the corrosion/freeze protection characteristics of the
engine coolant and may cause engine damage.

If available, refer to the chart on the coolant container to

ensure the coolant concentration in your vehicle will provide
adequate protection at the temperatures in which you drive.

Vehicles driven year-round in non-extreme climates should use a 50/50
mixture of engine coolant and distilled water for optimum cooling system
and engine protection.

Engine fluid temperature management (EcoBoost™ engine only)

Your vehicle has been designed to pull a trailer, but because of the added
load, the vehicle’s engine may temporarily reach higher temperatures
during severe operating conditions such as ascending a long or steep
grade while pulling a trailer in hot ambient temperatures.

At this time, you may notice your engine coolant temperature gauge
needle move toward the H and the POWER REDUCED TO LOWER
TEMP message may appear on the message center.

You may notice a reduction in the vehicle’s speed caused by reduced
engine power. Your vehicle has been designed to enter this mode if
certain high temperature/high load conditions take place in order to
manage the engine’s fluid temperatures. The amount of speed reduction
will depend on the vehicle loading, towing, grade, ambient temperature,
and other factors. If this occurs, there is no need to pull off the road.
The vehicle can continue to be driven while this message is active.

Maintenance and Specifications

353

2011 Flex (471)
Owners Guide, 2nd Printing
USA
(fus)

This manual is related to the following products: