beautypg.com

Instrument cluster – FORD 2011 Flex v.2 User Manual

Page 24

background image

BRAKE FLUID LEVEL LOW — Indicates the brake fluid level is low
and the brake system should be inspected immediately. Refer to Brake
fluid
in the Maintenance and Specifications chapter.

AWD OFF (if equipped) — Displayed when the AWD system has been
automatically disabled to protect itself. This is caused by operating the
vehicle with the compact spare tire installed or if the system is
overheating. The AWD system will resume normal function and clear this
message after driving a short distance with the road tire re-installed or
after the system is allowed to cool.

CHECK AWD (if equipped) — Displayed when a problem exists with
the AWD system. Contact your authorized dealer as soon as possible.

LOW TIRE PRESSURE — Displayed when one or more tires on your
vehicle has low tire pressure. Refer to Inflating your tires in the Tires,
Wheels and Loading
chapter.

TIRE PRESSURE MONITOR FAULT — Displayed when the Tire
Pressure Monitoring System is malfunctioning. If the warning stays on or
continues to come on, contact your authorized dealer as soon as
possible.

TIRE PRESSURE SENSOR FAULT — Displayed when a tire pressure
sensor is malfunctioning, or your spare tire is in use. For more
information on how the system operates under these conditions, refer to
Tire Pressure Monitoring System (TPMS) in the Tires, Wheels and
Loading
chapter. If the warning stays on or continues to come on,
contact your authorized dealer as soon as possible.

POWER STEERING ASSIST FAULT — The power steering system
has disabled power steering assist due to a system error; service is
required.

SERVICE POWER STEERING — The power steering system has
detected a condition that requires service.

SERVICE POWER STEERING NOW — The power steering system
has detected a condition that requires service immediately.

ENGINE OIL CHANGE SOON — Displayed when the engine oil life
remaining is 5% to 1%.

OIL CHANGE REQUIRED — Displayed when the oil life left reaches
0%.

INTKEY COULD NOT PROGRAM — Displayed when an attempt is
made to program a fifth integrated key to the remote key entry system.
For more information on integrated key, refer to the Locks and Security
chapter in this manual.

Instrument Cluster

24

2011 Flex (471)
Owners Guide, 2nd Printing
USA
(fus)

This manual is related to the following products: