Mykey troubleshooting, Mykey – FORD 2013 Fusion v.2 User Manual
Page 52
MYKEY TROUBLESHOOTING
Potential Causes
Condition
· The key in the ignition does not have admin
privileges.
I cannot program a key.
· The key in the ignition is the only admin
key (there always has to be at least one
admin key).
· The intelligent access key is not in the
backup slot (vehicles with push-button
start).
· SecuriLock® passive anti-theft system is
disabled or in unlimited mode.
· The key in the ignition does not have admin
privileges. I cannot program the optional
settings.
I cannot program the optional settings.
· No keys are programmed to the vehicle.
See Creating a MyKey (page 48).
· The key in the ignition does not have admin
privileges.
I cannot clear the restricted keys.
· No restricted keys are programmed to the
vehicle. See Creating a MyKey (page 48).
· Purchase a new key from your authorized
dealer.
I lost the only admin key.
· Program a spare key. See Passive Anti-
Theft System (page 58).
I lost a key.
· An admin fob is present at engine start-
up.
No restricted key functions with intelligent
access key (push-button start).
· No MyKey keys are programmed to the
vehicle. See Creating a MyKey (page 48).
· The MyKey key is not being used by the
intended user.
MyKey miles do not accumulate.
· The key system has been reset.
50
MyKey™
(If Equipped)