FORD 2013 Fusion v.2 - Manual (Page 103)

Park Brake
Action Message
Displays when the parking brake is set, the engine is running
and the vehicle is driven more than 3 mph (5 km/h). If the
warning stays on after the parking brake is released, contact
your authorized dealer.
Park Brake Engaged
The electric parking brake system has detected a condition
that requires service. See your authorized dealer.
Park Brake Malfunction
Service Now
Displays when the electric parking brake is not set. Park Brake Not Applied
Apply Park Brake
Displays when the electric parking brake did not set. Park Brake Not Applied
Re-Apply
Displays when the electric parking brake is running a diagnostic
check.
Park Brake Maintenance
Mode
Displays when the electric parking brake is set but has not be
released.
Park Brake Use Switch
to Release
Displays when the electric parking brake is set but has not be
released and the vehicle is moving.
Press Brake to Release
Park Brake
The electric park brake system has detected a condition that
requires service. See your authorized dealer.
Park Brake Limited
Function Service
Required
Displays when the electric parking brake was not released
causing it to overheat.
Park Brake System
Overheated
Displays when the electric parking brake is set and the vehicle
is started.
Release Park Brake
Displays when the electric parking brake is set. Park Brake Applied
Displays when the electric parking brake is released. Park Brake Released
101
Information Displays