Information displays – FORD 2013 Fusion v.2 User Manual
Page 101
Maintenance
Action
Message
Stop the vehicle as soon as safely possible, turn off the engine.
Check the oil level. If the warning stays on or continues to
come on with your engine running, contact your authorized
dealer as soon as possible.
LOW Engine Oil Pressure
Displayed when the engine oil life remaining is 10% or less.
See Engine Oil Check (page 244).
Change Engine Oil Soon
Displayed when the oil life left reaches 0%. See Engine Oil
Oil Change Required
Indicates the brake fluid level is low and the brake system
should be inspected immediately. See Brake Fluid Check
Brake Fluid Level LOW
Displays when the brake system needs servicing. Stop the
vehicle in a safe place. Contact your authorized dealer.
Check Brake System
Displays when the engine coolant temperature is excessively
high.
Engine Coolant Overtem-
perature
Displays when the engine has reduced power in order to help
reduce high coolant temperatures.
Power Reduced to
Lower Engine Temp
Displays to indicate that the vehicle is till in Transport or
Factory mode. This may not allow some features to operate
properly. See your authorized dealer.
Transport / Factory
Mode
Informs the driver that the powertrain needs service due to a
powertrain malfunction.
See Manual
MyKey
Action
Message
Displayed during key programming when MyKey cannot be
programmed.
MyKey Not Created
Displays when MyKey is active.
MyKey Active Drive
Safely
Displays when starting the vehicle and MyKey is in use and
the MyKey speed limit is on.
Speed Limited to XX
MPH/km/h
Displays when a MyKey is in use and the MyKey speed limit is
on and the vehicle speed is approaching 80 mph (130 km/h).
Near Vehicle Top Speed
99
Information Displays