FORD 2013 Flex v.1 - Manual (Page 158)

E. MAX A/C: Distributes recirculated air through the instrument panel
vents to cool the vehicle. This position is more economical and efficient
than normal A/C.
F. A/C: Press the button to turn air conditioning on or off. Air
conditioning cools the vehicle using outside air. To improve air
conditioning when starting your vehicle, drive with the windows slightly
open for two to three minutes.
Use A/C with recirculated air to improve cooling performance and
efficiency.
Note: A/C turns on automatically in MAX A/C, Defrost and Floor/Defrost.
G. AUTO: Press the button to turn on fully automatic operation. Select
the desired temperature using the temperature control. The system
automatically determines fan speed, air distribution, A/C operation, and
outside or recirculated air, to heat or cool the vehicle to maintain the
selected temperature.
H. Rear defrost: Turns the heated rear window on and off. Refer to
Heated rear window later in this chapter for more information. If your
vehicle is equipped with heated mirrors, this button turns them on also.
I. Defrost: Distributes air through the windshield defroster vents and
de-mister vents. This setting can also be used to defog and clear the
windshield of a thin covering of ice.
REAR PASSENGER CLIMATE CONTROL
A. Fan Speed: Turn to increase or decrease the fan speed.
B. Overhead: Distributes air through the overhead vents vents.
C. Floor: Distributes air through the floor vents.
D. Overhead/Floor: Distributes air through the overhead vents and floor
vents.
A B C D E F
158 Climate Control
2013 Flex (471)
Owners Guide gf, 1st Printing
USA (fus)