FORD 2013 Explorer v.4 - Manual (Page 298)

Trailer Hitch Cover
Your vehicle is equipped with a removable trailer hitch trim cover. To
remove the trim cover:
1. Loosen the two 1 ⁄
4
-turn fasteners
(A) in the bottom of the cover by
turning them counterclockwise. Pull
the cover rearward to remove it.
The fasteners remain attached to
the cover.
2. To reinstall the cover, insert the
four plastic tabs on top of the cover
into the corresponding slots (B),
and push the cover into the bumper
trim.
3. Hold the cover against the bumper trim and reinstall the two 1 ⁄
4
-turn
fasteners by turning them clockwise.
A A
B B B B
Towing 297
2013 Explorer (exp)
Owners Guide gf, 4th Printing, November 2012
USA (fus)