FORD 2013 Explorer v.4 - Manual (Page 185)

1. Fold the outboard head restraint by
pulling the head restraint release strap.
2. Pull on the strap located on the
back of the second row seat. This
will fold the seat back forward. Pull
the strap a second time to tumble
the seat forward, allowing easy exit
from the third row seat.
3. To return the seat back to the floor from tumbled
position, rotate the seat down until you hear it
latching to the floor.
4. Lift the seat back toward the rear
of the vehicle, and rotate the seat
back until you hear a click, locking
it in the upright position.
Note: The seat back will not raise
if the rear latch hooks are not
properly engaged to the floor striker.
If the seat back does not raise, then
repeat Step 3.
184 Seats
2013 Explorer (exp)
Owners Guide gf, 4th Printing, November 2012
USA (fus)