FORD 2013 E-450 v.2 - Manual (Page 279)

• The jack is located in the rear
right-hand side of the cargo area.
8. Remove any wheel trim. Insert the tapered end of the lug nut wrench
behind wheel covers or hubcaps and twist off.
9. Loosen the wheel nut by pulling up on the handle of the lug nut
wrench about one-half turn (counterclockwise). Do not remove the
wheel lug nuts until you raise the tire off the ground.
Replacing the tire
1. Assemble the jack handle sections together and lock into the jack. Use
the jack handle to slide the jack under the vehicle.
2. Position the jack to raise the front or rear wheel.
Note: Jack at the specified locations to avoid damage to the vehicle.
278 Wheels and Tires
2013 Econoline (eco)
Owners Guide gf, 2nd Printing, November 2012
USA (fus)