beautypg.com

134 transmission – FORD 2013 E-450 v.2 User Manual

Page 135

background image

Understanding the Shift Positions of the 5–Speed Automatic
Transmission (If Equipped - 5.4L and 6.8L Gasoline Engines Only)

WARNING: Always set the parking brake fully and make sure
the gearshift is latched in P (Park). Turn the ignition to the lock

position and remove the key whenever you leave your vehicle.

WARNING: Do not use the tow/haul feature when driving in icy
or slippery conditions as the increased engine braking can cause

the rear wheels to slide and the vehicle to swing around with the
possible loss of vehicle control.

Your vehicle has been designed to improve fuel economy by reducing
fuel usage during coasting or deceleration. When you take your foot off
the accelerator pedal and the vehicle begins to slow down the torque
converter clutch locks up and aggressively shuts off fuel flow to the
engine while decelerating. This fuel economy benefit may be perceived
as a light to medium braking sensation when removing your foot from
the accelerator pedal.

P (Park)

This position locks the transmission and prevents the rear wheels from
turning.

To put your vehicle in gear:

1. Start the engine

2. Press the brake pedal

3. Move the gearshift lever into the desired gear

To put your vehicle in P (Park):

1. Come to a complete stop.

2. Move the gearshift lever and securely latch it in P (Park).

R (Reverse)

With the gearshift lever in R (Reverse), the vehicle will move backward.
Always come to a complete stop before shifting into and out of R
(Reverse).

134

Transmission

2013 Econoline (eco)
Owners Guide gf, 2nd Printing, November 2012
USA
(fus)

This manual is related to the following products: