Upfitter controls (if equipped), Upfitter controls, 202 fuses – FORD 2013 E-450 v.2 User Manual
Page 203

Fuse or relay
location
Fuse amp
rating
Protected components
39
20A
Radio, Navigation
40
20A
Amplifier
41
15A
Radio, Switch illumination,
Reverse camera mirror, Automatic
dimming rear view mirror,
Inverter
42
10A
Upfitter switch
43
10A
Stripped chassis instrument panel
connector #1
44
10A
Trailer tow battery charge relay
45
5A
Wipers, Stripped chassis Engine
connector 3
46
7.5A
Passenger airbag deactivation
indicator
47
30A circuit
breaker
Windows accessory delay
48
Relay
Delayed accessory
UPFITTER CONTROLS (IF EQUIPPED)
The upfitter option package
provides four switches, mounted in
the center of the instrument panel.
These switches will only operate
while the ignition is in the on
position, whether the engine is
running or not. However, it is
recommended that the engine
remain running to maintain battery charge when using the upfitter
switches for extended duration or higher current draws.
When switched on, they provide 10 amps, 15 amps or 30 amps of
electrical battery power for a variety of personal or commercial uses.
A fuse and relay kit will also be included with this option. This kit
contains the required fuses and relays that need to be installed into the
power distribution box located under the hood. Refer to the instruction
sketch included in the kit. See your authorized dealer for service.
AUX 1
AUX 2
AUX 3
AUX 4
202
Fuses
2013 Econoline (eco)
Owners Guide gf, 2nd Printing, November 2012
USA (fus)