Myford touch – FORD 2014 C-MAX Hybrid User Manual
Page 335

E142607
Press the Settings icon >
Vehicle > Rear View Camera,
then select from the following
settings:
•
Rear Camera Delay
•
Visual Park Aid Alert
•
Guidelines.
You can find more information on the rear
view camera in another chapter. See Rear
View Camera (page 168).
Enable Valet Mode
Valet mode allows you to lock the system.
No information is accessible until the
system is unlocked with the correct PIN.
You can create your own four-digit PIN to
lock and unlock the system.
E142607
1.
Press the Settings icon > Vehicle >
Enable Valet Mode.
2. When prompted, enter a four-digit PIN.
After you press Continue, the system locks
until you enter the PIN again.
Note: If the system locks, and you need to
reset the PIN, enter 3681 and the system
unlocks.
Charge Point Light Ring
E142607
Press the Settings icon >
Vehicle > Charge Point Light
Ring, then select from the
following:
Charge point light ring
Illuminates when plugging in, opening doors, pressing the
unlock button on your remote, and while charging.
On
Does not illuminate.
Off
Cord Acknowledgement: Illuminates when plugging in.
Limited
Charge Status: Illuminates when opening doors or
pressing the unlock button on your remote.
Note: Details on the charge port light ring
functions are in another chapter. See High
Voltage Battery (page 146).
Settings
Access and adjust system settings, voice
features, as well as phone, navigation and
wireless settings.
System
E142607
Press the Settings icon >
Settings > System, then select
from the following:
333
C-MAX (CCG)
MyFord Touch™
(If Equipped)