Ling function – BMW 325xi Sports Wagon 2006 User Manual

Page 85

Defrosting windows and removing
condensation

Quickly removes ice and conden-
sation from the windshield and
front side windows.

Switching cooling function on/off

The cooling function cools and
dehumidifies the incoming air
before also reheating it as

required, according to the temperature setting.
Depending on the weather, the windshield may
fog over briefly when the engine is started.
The cooling function is automatically switched
on along with the AUTO program. The passen-
ger compartment can only be cooled while the
engine is running.

Rear window defroster

The defroster switches off auto-
matically after a certain time.

Ventilation

1 Use the knurled wheels to smoothly open

and close the air vents

2 Use the lever to change the direction of the

airflow

3 Knurled wheel for more or less cool air from

the vents for the upper body area

Ventilation for cooling

Adjust the vent outlets to direct the flow of cool
air in your direction, for instance if it has become
too hot in the car.

Draft-free ventilation

Set the vent outlets so that the air flows past
you and not straight at you.

Ventilation in the rear

1 Use the knurled wheel to smoothly open

and close the air vents

2 Use the knurled wheel to adjust the temper-

ature:

Turn toward blue: colder

Turn toward red: warmer

3 Use the lever to change the direction of the

airflow

Microfilter/activated-charcoal filter

The microfilter traps dust and pollen in the
incoming air. The activated-charcoal filter pro-
vides additional protection by filtering gaseous
pollutants from the outside air. Your BMW Cen-
ter replaces this combined filter during routine
maintenance.
You can call up further information in the service
requirements display, refer to page