BMW 325xi Sports Wagon 2006 User Manual
Page 123
121
1.
Turn the wheel inwards.
2.
Open the flap in the wheel well. To do so,
turn the fastener counterclockwise using a
coin, for example.
Changing low-beam and high-beam
bulbs
1.
Remove the relevant cover for the head-
lamp.
2.
Disconnect the plug from the lamp.
3.
Push the wire bracket to the side out of the
mounting, arrow
1, and fold it down,
arrow
2.
4.
Remove the bulb.
5.
Insert new bulb as shown in the detail of the
illustration above.
6.
Fold up the wire bracket and engage it.
7.
Connect the plug.
8.
Reattach the cover.
Parking lamps, roadside parking lamps
5 watt bulb, W 5 W
1.
Remove the cover for the high-beam head-
lamp.
2.
Pull out the bulb socket, see arrow.
3.
Remove and replace the bulb.
4.
Insert bulb socket.
5.
Reattach the cover.
Turn signals, front
21 watt bulb, PY 21 W
or PY 21 W Silver Vision
1.
Open the flap in the wheel well, refer to
Access through the wheel well on
page
.
2.
Rotate turn signal bulb socket
1 to the left
and remove.
3.
Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.
4.
Insert turn signal bulb socket
1.
5.
Attach the flap to the wheel well.
Side-mounted turn signals
In the event of a malfunction, please contact
your BMW Center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.
Online Edition for Part-No. 01 41 0 012 353 - © 03/06 BMW AG