Replacing components, Onboard tool kit, Wiper blades – BMW 325xi Sports Wagon 2006 User Manual
Page 121: Lamps and bulbs, Press the red
119
Replacing components
Onboard tool kit
The onboard tool kit is stored in a compartment
on the left-hand side underneath the cargo area
floor panel.
Wiper blades
Changing front wiper blades
1.
Fold up the wiper arm.
2.
Remove the cover. To do so, press the hook
on the bottom, see arrow.
3.
Fold the wiper blade upwards.
4.
Remove the wiper blade in the direction of
the windshield, see arrow.
In order to avoid damage, make sure that
the wiper arms are against the windshield
before you open the engine compartment.
<
Changing rear wiper blade
1.
Fold up the wiper arm.
2.
Pull off the wiper blade, see arrow.
3.
Insert the new wiper blade and press it on
until it audibly engages.
Lamps and bulbs
Lamps and bulbs make an essential contribu-
tion to vehicle safety. They should, therefore,
be handled carefully. BMW recommends hav-
ing your BMW Center perform any work that
you do not feel competent to perform yourself
or that is not described here.
Never touch the glass of new bulbs with
your bare fingers, as even minute
amounts of contamination will burn into the
bulb's surface and reduce its service life. Use a
clean tissue, cloth or something similar, or hold
the bulb by its base.
<
You can obtain a selection of replacement bulbs
at your BMW Center.
When working on electrical systems,
always begin by switching off the con-
sumer in question, otherwise short-circuits
could result. To avoid possible injury or equip-
ment damage when replacing bulbs, observe
Online Edition for Part-No. 01 41 0 012 353 - © 03/06 BMW AG