BMW 325xi Sports Wagon 2006 User Manual
Page 37
35
Settings for the seat back width and lumbar
support are not stored in memory.
Storing
1.
Switch on radio readiness or the ignition,
refer to page
.
2.
Adjust the seat and exterior mirrors to the
desired positions.
3.
Press the
button.
The LED in the button lights up.
4.
Press the desired memory key
1 or 2.
The LED goes out.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.
Automatic call-up
You can select at what occasion the stored
positions of the driver's seat and exterior mir-
rors are to be called up.
>
Call-up when the vehicle is unlocked
>
Call-up when the driver's door is opened.
When this Personal Profile function is
used, first ensure that the footwell behind
the driver's seat is free of obstacles. Failure to
do so could cause injury to persons or damage
to objects as a result of a rearward movement of
the seat.
<
The adjusting procedure is immediately halted
when you press a seat adjustment switch or one
of the MEMORY buttons.
Activating/deactivating automatic call-
up
Operating principle, refer to page
.
1.
Lightly push button
1 in the turn indicator
stalk up or down repeatedly until the symbol
appears in the display accompanied by the
word "SET".
2.
Press button
2.
3.
Lightly push button
1 in the turn indicator
stalk down repeatedly until the symbol
appears in the display.
4.
Press button
2.
5.
Use button
1 to select:
>
Call-up when the vehicle is unlocked.
>
Call-up when the driver's door is
opened.
>
Switch off automatic function.
6.
Press button
2.
The setting is stored.
Manual call-up
Do not call up memory while you are driv-
ing, otherwise unexpected seat move-
ment could result in an accident.
<
Online Edition for Part-No. 01 41 0 012 353 - © 03/06 BMW AG