Brake force display, Airbags, Technology for driving comfort and safety – BMW 325xi Sedan 2006 User Manual
Page 92

Technology for driving comfort and safety
90
tiously and think well ahead. Have the system
checked.
If the warning lamp lights up during the first
engine starting following a power supply inter-
ruption, the system must be activated by being
initialized.
Brake Force Display*
The brake lamps light up in two stages,
depending on how sharply you apply the
brakes.
>
Normal braking:
The brake lamps and the center brake lamp
light up.
>
Sharp braking:
The illuminated surface of the brake lamps
is enlarged, as long as the rear fog light is
not switched on.
Airbags
The following airbags are located under the
marked covers:
1 Front airbags
2 Head airbags
3 Side airbags
Protective action
Observe the adjustment instructions on
page
to ensure the best possible per-
sonal protection.
<
The front airbags help protect the driver and
front passenger by responding to frontal
impacts in which safety belts alone cannot pro-
vide adequate restraint. When needed, the
head and side airbags help provide protection in
the event of side impact. The relevant side air-
bag supports the side upper body area. The
head air bag supports the head.
The airbags will purposely not be activated by
every collision, e.g. not by more minor acci-
dents, certain roll-over situations and rear-end
collisions.
Do not apply adhesive materials to the
cover panels of the airbags, cover them or
modify them in any other way. Do not attach
Online Edition for Part-No. 01 41 0 159 816 - © 09/05 BMW AG