Speed limit, Stopwatch – BMW 325xi Sedan 2006 User Manual
Page 83
81
until "Check Control messages" is selected
and press the controller.
5.
Select a text message and press the con-
troller.
To exit the display:
Select the
arrow and press the controller.
Speed limit
You can enter a speed, and a Check Control
message will indicate when you reach this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph or 5 km/h.
Displaying, setting or changing the
limit
1.
Open the start menu.
2.
Call up "Navigation".
3.
Select "Car Data" and press the controller.
4.
Select "Limit" and press the controller.
5.
Select the speed value and press the con-
troller.
6.
Turn the controller to set the limit.
7.
Press the controller to apply the setting.
The limit is automatically switched on.
Applying your current speed as limit
Select "Select current speed" and press the
controller. The system adopts your current
speed as the limit.
Activating the limit
Select "On" and press the controller.
Limit is activated.
Stopwatch
iDrive concept, refer to page
1.
Open the start menu.
2.
Call up "Navigation".
3.
Select "Car Data" and press the controller.
4.
Select "Stopwatch" and press the control-
ler.
Online Edition for Part-No. 01 41 0 159 816 - © 09/05 BMW AG