Seat and mirror memory, Adjustments – BMW 325xi Sedan 2006 User Manual
Page 46
Adjustments
44
Seat and mirror memory*
You can store and call up two different combi-
nations of driver's-seat and exterior-mirror
positions.
Settings for the seat back width and lumbar
support are not stored in memory.
Storing
1.
Switch on radio readiness or the ignition,
refer to page
2.
Adjust the seat and exterior mirrors to the
desired positions.
3.
Press the
button.
The LED in the button lights up.
4.
Press the desired memory key
1 or 2.
The LED goes out.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.
Automatic call-up
You can select at what occasion the stored
positions of the driver's seat and exterior mir-
rors are to be called up.
>
Call-up when the vehicle is unlocked
>
Call-up when the driver's door is opened.
When this Personal Profile function is
used, first ensure that the footwell behind
the driver's seat is free of obstacles. Failure to
do so could cause injury to persons or damage
to objects as a result of a rearward movement of
the seat.
<
The adjusting procedure is immediately halted
when you press a seat adjustment switch or one
of the MEMORY buttons.
Selecting automatic call-up
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Vehicle settings" and press the
controller.
4.
Select "Door locks" and press the control-
ler.
5.
Select "Central locking" and press the con-
troller.
6.
Select "Last seat pos." and press the con-
troller.
7.
Select "After unlocking" or "After door
opened".
8.
Press the controller.
Switching off automatic call-up
Select "Deactivated" and press the controller.
Manual call-up
Do not call up memory while you are driv-
ing, otherwise unexpected seat move-
ment could result in an accident.
<
Online Edition for Part-No. 01 41 0 159 816 - © 09/05 BMW AG