beautypg.com

Drive-off assistant – BMW 325xi Sedan 2006 User Manual

Page 89

background image

Co

n

tr

o

ls

87

Refere

nce

At a glan

ce

Dr

ivi

n

g ti

ps

Co

mm

un

icat

io

ns

Navigation

Ente

rt

ai

nme

n

t

M

o

bi

lity

Malfunction in driving stability control
systems

The warning lamps come on. DSC
including DTC and DBC is malfunc-
tioning.
The vehicle remains operational.

Have the system checked as soon as possible.

Drive cautiously and think well ahead,
otherwise unstable driving conditions

could result.

<

323i*, 325i, 330i

The warning lamps for the brake sys-
tem come on in red, together with the
yellow indicator lamps for driving sta-
bility control systems and FTM:
The driving stability control systems
and the Flat Tire Monitor have failed.

All warning lamps come on in yellow:
The driving stability control systems and the
Flat Tire Monitor have failed. The electronic
brake-force distribution is still active.
Have the system checked as soon as possible.

Drive cautiously, think well ahead and
avoid full brake applications, otherwise

accidents could result.

<

Display

*

of this malfunction on Cana-

dian models.

Display

*

of this malfunction on Cana-

dian models.

With xDrive 325xi, 330xi

If one of the malfunctions described
below occurs, drive cautiously and think

well ahead. Also avoid situations that require full
braking, otherwise accidents could result.
Avoid driving on rough tracks and pressing the
accelerator pedal down to full throttle or kick-
down position, otherwise the drive system
could be damaged.

<

The warning lamps for the brake sys-
tem come on in red, together with the
yellow indicator lamps for driving sta-
bility control systems and FTM:
The driving stability control systems
and the Flat Tire Monitor have failed.

All warning lamps come on in yellow:
The driving stability control systems and the
Flat Tire Monitor have failed. The electronic
brake-force distribution is still active.
Have the system checked as soon as possible.

Display

*

of this malfunction on Cana-

dian models.

Display

*

of this malfunction on Cana-

dian models.

Drive-off assistant

The drive-off assistant enables you to drive off
smoothly on uphill gradients. It is not necessary
to use the handbrake for this.

1.

Hold the car in place by depressing the
brake.

2.

Release the brake and drive off without
delay.

The drive-off assistant holds the car in
place for approx. 2 seconds after the

brake is released. Depending on vehicle load,
the car may roll backwards a little during this
time span. Drive off without delay after releas-
ing the brake. Otherwise, the drive-off assistant
will no longer hold the car in place after approx.
2 seconds and the car will start to roll back-
wards.

<

Online Edition for Part-No. 01 41 0 159 816 - © 09/05 BMW AG

This manual is related to the following products: