beautypg.com

Driving stability control systems – BMW M5 Sedan 2007 User Manual

Page 80

background image

Te

ch

nolo

gy

fo

r co

mfort

, c

o

nve

n

ie

nc

e an

d

sa

fe

ty

78

PDC with visual warning*

You can also have the system show distances
to objects on the Control Display. Objects that
are farther away are already shown there before
a signal tone sounds. The setting is stored for
the remote control currently in use.
iDrive, for explanation of principle, refer to
page

16

.

1.

Press the

button.

This opens the start menu.

2.

Press the controller to open the menu.

3.

Turn the controller until "Settings" is
selected and press the controller.

4.

Turn the controller until "Vehicle / Tires" is
selected and press the controller.

5.

Change to upper field if necessary. Turn the
controller until "PDC" is selected and press
the controller.

6.

Select "PDC display on" and press the con-
troller.

The PDC screen is activated.

The display appears on the Control Display as
soon as PDC is activated.

System limits

Even with PDC, final responsibility for
estimating the distance between the

vehicle and any obstructions always remains
with the driver. Even when sensors are pro-
vided, there is a blind spot in which objects can
no longer be detected. The system is also sub-
ject to the physical limits that apply to all forms
of ultrasonic measurement, such as those
encountered with tow bars and trailer cou-
plings, or thin and wedge-shaped objects etc.
Low objects already displayed, e.g. curbs, can
also disappear from the detection area of the
sensors again before or after a continuous tone
already sounds. Higher, protruding objects, e.g.
ledges, cannot be detected.
Loud sources of sound, inside and outside the
vehicle, could drown out the PDC signal tone.

<

Driving stability control

systems

Your BMW is equipped with an extended array
of systems designed to enhance and maintain
vehicle stability under extreme conditions.

ABS Antilock Brake System

ABS prevents locking of the wheels during
braking. Safe steering response is maintained
even during full braking. Active safety is thus
increased.
The ABS is operational every time you start the
engine. Braking safely refer to page

113

.

CBC Cornering Brake Control

When braking during curves or when braking
during a lane change, driving stability and steer-
ing response are improved further.

Electronic brake-force distribution

The system controls the brake pressure in the
rear wheels to ensure stable braking behavior.

ba8_m5us.book Seite 78 Montag, 5. Februar 2007 12:03 12

Online Edition for Part no. 01 41 0 013 310 - © 02/07 BMW AG