Safety belts – BMW M5 Sedan 2007 User Manual

Page 47

Front seats: height adjustment

Removing:

Move the head restraint up as far as possi-
ble.

Pull out the head restraint completely with a
firm movement.

Installing:

Slide the switch upward for a maximum of
approx. 10 seconds, however if possible
only until a change in the humming noise
indicates that the head restraint bracket is
moved all the way to the top.

Insert the head restraint and press down on
both sides until it is heard and felt to
engage.

Front seats: angle adjustment

Swivel the head restraint.
On seats with a shoulder support

you adjust

the distance to the back of the head with the
shoulder support, refer to page

Adjusting side extensions*

You can fold the side extensions on the head
restraint forward for increased lateral support in
the resting position.

Front head restraints, active*

Seats with a shoulder support

are equipped

with an active head restraint.
In the event of a rear-end collision of sufficient
severity, the active head restraint reduces the
distance to the head.

Do not use seat or head restraint covers
and do not hang objects, e.g. clothes

hangers, on the head restraints or attach any
accessories to the seat or head restraint. Other-
wise the protective function of the active head
restraints will be impaired and personal safety
endangered.

Rear seats: height adjustment

To raise: pull up.

To lower: press the button, arrow

1, and

push the head restraint downward.

Removing

Pull the head restraint upward to the stop.

Press the button, arrow

1, and pull the head

restraint all the way out.

Safety belts

To ensure that the safety systems con-
tinue to provide optimized protection,

please observe the adjustment instructions on
page

Before every drive, make sure that safety belts
are being worn at all of the occupied seats. Air-
bags complement the safety belt as an addi-
tional safety device, but they do not represent a
substitute.

ba8_m5us.book Seite 45 Montag, 5. Februar 2007 12:03 12