BMW X5 3.0si SAV 2007 - Manual (Page 232)

Replacing components
230
Tail lamps
> Turn signals, brake lamps: 21-watt bulb,
P21W
> Backup lamps and brake force display:
16-watt bulb, W16W
> Rear lamp: LED technology.
In case of a defect, please go to a BMW
Sports Activity Vehicle Center or a work-
shop that works according to BMW repair
procedures with correspondingly trained
personnel.
Position of lamps
1 Rear lamp
2 Brake force display
3 Turn signal
4 Brake lamp/rear lamp
5 Backup lamp
6 Brake lamp
Brake lamp
1. Open the side panel in the cargo bay.
2. Remove the first-aid kit * and warning trian-
gle * if necessary. Fold up the insulation.
3. Turn the bulb socket concerned to the left
and remove.
4. Remove the upper bulb for replacement.
Apply gentle pressure to the lower bulb
while turning it to the left for removal and
replacement.
5. Remount the side panel.
Turn signal
1. Open the side panel in the cargo bay.
2. Remove the first-aid kit * and warning trian-
gle * if necessary. Fold up the insulation.
3. Turn the bulb socket to the left and remove.
4. Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.
5. Remount the side panel.
Backup lamp
1. Open the side panel in the cargo bay.
2. Remove the first-aid kit * and warning trian-
gle * if necessary. Fold up the insulation.
3. Turn the bulb socket to the left and remove.
4. Remove the bulb for replacement.
5. Remount the side panel.
Online Edition for Part no. 01 41 0 012 501 - © 08/06 BMW AG