beautypg.com

Air conditioning system – BMW Z4 sDrive35i 2009 User Manual

Page 95

background image

Co

n

tr

o

ls

93

Refere

nce

At a glan

ce

Dr

ivi

n

g ti

ps

Commu

nication

s

Navigation

Ente

rt

ai

nme

n

t

M

o

bi

lity

Air conditioning system

1 Air distribution
2 Recirculated-air mode
3 Cooling function

4 Temperature
5 Air flow rate
6 Rear window defroster

Air distribution

Direct the flow of air to the win-
dows

, to the upper body area

or to the knee area and footwell
. Intermediate settings are pos-

sible. In the 6 o'clock position, a small amount
of air is also directed towards the windows in
order to keep them from fogging over.

Recirculated-air mode

If the air outside the car has an
unpleasant odor or contains pollut-

ants, shut off the supply to the interior of the car
temporarily. The system then recirculates the
air currently within the vehicle.
You can also activate/deactivate the recircu-
lated-air mode by means of a button

*

on the

steering wheel, refer to page

11

.

If condensation starts to form on the
inside window surfaces during operation

in the recirculated-air mode, you should switch
it off while also increasing the air flow rate as
required.
The recirculated-air mode should not be used
continuously for lengthy periods, otherwise the
quality of the air inside the car will gradually
deteriorate.

<

Air flow rate

Press the corresponding button.
The higher the rate, the more
effective the heating or cooling

will be.
The air flow rate may be reduced or the blower
may be switched off entirely to save on battery
power.

Switching the system on/off

With the blower at its lowest set-
ting, press the left side of the but-
ton. Thes blower and air condi-

tioner are completely switched off and the air
supply is cut off.
To switch on the air conditioner, set the desired
air flow rate.

Switching cooling function on/off

The cooling function cools and
dehumidifies the incoming air

before reheating it as required, according to the
temperature setting. This function is only avail-
able while the engine is running.
The cooling function helps prevent condensa-
tion on the windows or removes it quickly.
Depending on the weather, the windshield may
fog over briefly when the engine is started.

Online Edition for Part no. 01 41 2 602 116 - © 01/09 BMW AG

This manual is related to the following products: