BMW Z4 sDrive35i 2009 User Manual
Page 211
209
Xenon lamps
Have any work on the xenon lamp system,
including bulb replacements, performed
only by a BMW center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel. Otherwise, if
such work is carried out improperly, the high
voltage in the system presents the danger of
fatal injuries.
<
Parking lamps and roadside parking
lamps, daytime running lamps
H8 bulb, 35 watts
1.
Switch off the lamps and take the remote
control out of the ignition lock.
2.
Turn the upper access cover to the left and
remove it, see arrow.
3.
Turn the bulb by approx. 90°, see arrow
1,
and pull it out, see arrow
2.
4.
Disconnect the plug, change the bulb and
reconnect the plug.
5.
Insert the bulb and turn it until it stops.
6.
Screw on the access cover tightly by turn-
ing it to the right.
Be careful when attaching the access
cover; otherwise it may leak, causing
damage to the headlamp system.
<
Turn signals, front
P24W bulb, 24 watt
1.
Turn the wheel outwards.
2.
Turn both locks in the wheel house to the
left and remove the cover.
3.
Turn the bulb holder to the left and
remove it.
4.
Turn the bulb to the right, see arrow, and
remove it.
5.
Change the bulb and screw it into the bulb
holder toward the left.
6.
Insert the bulb holder and turn it to the right.
7.
Reattach the cover.
Online Edition for Part no. 01 41 2 602 116 - © 01/09 BMW AG