Safety belts, Adjustments – BMW Z4 sDrive35i 2009 User Manual
Page 46
Adjustments
44
Storing
1.
Switch on radio readiness or the ignition,
refer to page
2.
Adjust the seat and exterior mirrors to the
desired positions.
3.
Press the
button.
The LED in the button lights up.
4.
Press the desired memory button
1 or 2: the
LED goes out.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.
Call-up
Do not call up memory while you are driv-
ing, otherwise unexpected seat move-
ment could result in an accident.
<
Convenience mode
1.
Unlock and open the driver's door or switch
on radio readiness, refer to page
.
2.
Briefly press the desired memory
button
1 or 2.
The adjusting procedure is halted immediately
when you touch a seat adjustment switch or
one of the memory buttons.
Safety feature
1.
Close the driver's door and switch the igni-
tion on or off, refer to page
2.
Press the desired memory button
1 or 2
and keep it pressed until the adjustment
process has been completed.
If the
button was pressed accidentally:
Press the button again; the LED goes out.
Call-up with the remote control
The driver's seat position last stored is stored
for the remote control currently in use.
You can select whether the seat should be reset
to that position.
When this Personal Profile function is
used, first make sure that the footwell
behind the driver's seat is free of obstacles.
Failure to do so could result in damage to the
objects if the seat were to move rearward.
<
The adjusting procedure is halted immediately
when you touch a seat adjustment switch or
one of the memory buttons.
iDrive, for operating principle refer to page
1.
"Settings"
2.
"Door locks"
3.
"Last seat position automatic"
Safety belts
Observe the adjustment instructions on
page
to ensure the best possible per-
sonal protection.
<
Before every drive, make sure that all occupants
wear their safety belts. Airbags complement the
safety belt as an additional safety device, but
they do not represent a substitute.
Online Edition for Part no. 01 41 2 602 116 - © 01/09 BMW AG